Gpl Declarations - NComputing L300 User Manual

NComputing L300 and L350 User Manual
GPL Declarations
The NComputing L300 and L350 access device contains – in part – some free software (software licensed
in a way that ensures your freedom to run, copy, distribute, study, change and improve the software).
This free software is also contained in the L300 and L350 firmware update files that are distributed
together with NComputing vSpace Server software installation packages that are expressly for the L300
or L350. The free software contained within the L300 and L350 firmware includes a version of X-
LOADER, U-BOOT, LINUX, LIBSYSFS, LIBUCI, LIBUSBIP, ETHTOOL, UCLIBC, QT and BUSYBOX.
Further, for at least three (3) years from the date of distribution of the applicable product or software,
we will give to anyone who contacts us at gplcoderequest@ncomputing.com, for a charge of no more
than our cost of physically performing source code distribution, a machine-readable copy of the
complete corresponding source code for the version of the software that we distributed to you. For
additional information refer to this page on the NComputing website:
www.ncomputing.com/gplcodedownload
Page 9 of 76
498943_v2