Applying Profiles - NComputing L300 User Manual

NComputing L300 and L350 User Manual
5.14 Applying Profiles
To apply a saved profile to other devices, select one or more L-series devices within the Devices list and
then right-click on any of the selected devices. From the pop-up menu that displays, select "Apply
Configuration Profile," as shown below:
After confirming the action, the NC-Console will begin updating the selected devices. This process may
take a few moments, depending on the number of devices affected by the update. Once the process is
complete, the affected device(s) will reboot automatically.
NOTE: If a device has a password applied to it, you will be prompted to enter the password when
attempting to apply a profile to that device.
Page 71 of 76
498943_v2