Creating Profiles; Editing Profiles - NComputing L300 User Manual

NComputing L300 and L350 User Manual
feature adds the ability to design and then deploy pre-selected configuration profiles to groups of
devices in one step.
5.12 Creating Profiles
Profiles can be created by right-clicking on a device in the Devices list and selecting the "Store
Configuration Profile" option from the pop-up menu that displays, as shown below:
After choosing to store the selected profile, a confirmation will appear. Select "Yes" from the
confirmation dialog box to store the profile in the "Profiles" section of the vSpace NC-Console. The NC-
Console can store multiple profiles, and you can edit or remove them at any time.
5.13 Editing Profiles
Once a profile is created, administrators can edit the profile in the same way they would apply changes
to the settings of an individual device. To do this, select "Profiles" from the left navigation tree within
the NC-Console, and then right-click on a profile, as shown below:
Page 69 of 76
498943_v2