NComputing L300 User Manual page 3

NComputing L300 and L350 User Manual
and Client Access Licenses for each device or user accessing Windows Server software. You cannot use
the vSpace Server software with Windows Client software (i.e., Windows Vista, Windows 7) unless a
single user and no other user accesses the same Windows Client software at any one time, or you are
authorized to do so under an applicable license from Microsoft or as expressly set forth in the
"Microsoft Windows Server to Windows XP License Rights" section of the NComputing EULA. In all cases,
your rights and obligations with respect to the use of vSpace Server software with Windows Server
software and Windows Client software are defined by both the NComputing vSpace Server software
EULA and the applicable Microsoft Software License Agreement or EULA. For more information on
licensing with Microsoft operating systems see: www.ncomputing.com/mslicensing
For single user applications of your L-series product such as remote control, digital signage and 1:1 VDI
refer to the same web page for information on client operating systems currently supported.
The NComputing hardware and software products described in this user manual are protected by
numerous granted and pending U.S. and international patents. Some components of NComputing
products utilize open-source software. Please refer to the GPL Declarations section of this User Manual
for more information.
© 2015 NComputing Co., Ltd. All rights reserved. NComputing, vSpace Server, and Numo are registered
trademarks of NComputing Co., Ltd. Microsoft, Windows, Windows Media, and DirectShow are
registered trademarks of Microsoft Corporation. Intel, Core 2, Core i5, and Core i7 are registered
trademarks of Intel Corporation. VESA is a trademark of Video Electronics Standards Association.
Kensington is a trademark of ACCO World Corporation. All other trademarks are the property of their
respective owners.
Page 3 of 76
498943_v2