Server Groups Tab - NComputing L300 User Manual

Autoconnect to Configures the device to automatically connect to a predefined server location or
server group.
Manual Configures the device so that the user can select a specific host, IP or Server Group
connection each time the device boots.
options
Auto-discovered Enable to display all available hosts on the device's subnet.
connections
IP address or Enable to allow the user to type in a specific IP or host name.
hostname
Server group list Enable to allow the user to select a server group to connect to.
5.5 Server Groups Tab
The "Server Groups" tab allows administrators to combine several servers into a group, and then
instruct the device to connect only to servers in that group. Exactly which servers are included in a given
group and the order in which devices connect to them can be designated and altered within this menu.
When the device is setup to autoconnect to a server group, it will connect to the first available server in
the list (in the order set in the group). If the first server is not available, the device will then connect to
the next server in the group, and so on. This is a key component for using the auto-failover feature of
the L300 or L350.
Page 62 of 76
NComputing L300 and L350 User Manual
498943_v2