User Account Creation - NComputing L300 User Manual

At the "vSpace Server successfully installed" screen, click "Close" to end the installer, and select
•
whether or not to immediately restart the computer (a restart is required before vSpace Server
can be used).
Proceed to the following sections to connect your L-series devices, register and activate the
•
software and devices and update the device firmware (as needed).
User Account Creation
The L300 and L350 can access a Windows session using either local or domain user accounts. The
optimal type of user account will vary depending on the type of environment the vSpace Server host is
being deployed into. You can use existing accounts or, if preferred, create new user accounts specifically
for the terminals.
To create new local user accounts and add them to the Remote Desktop Users Group:
1. From the host Windows Server 2012R2 session, right click "Start" then click on "Computer
Management".
2. From within the Computer Management window under System Tools select "Local Users and
Groups" in the left navigation tree.
3. Right Click on "Users" and select "New User..." to create as many new users as needed.
Page 16 of 76
NComputing L300 and L350 User Manual
498943_v2