NComputing L300 User Manual page 13

This will show the user accounts in form of a list similar to:
Name SID
Admin S-1-5-21-3686465141-1345607283-3162306831-500
Guest S-1-5-21-3686465141-1345607283-3162306831-501
HomeGroupUser$ S-1-5-21-3686465141-1345607283-3162306831-1003
John S-1-5-21-3686465141-1345607283-3162306831-1002
Paul S-1-5-21-3686465141-1345607283-3162306831-1005
For vSpace Server installation an account whose Security Identifier (SID) ends with -500 (the 'Admin'
account in the above example) must be chosen. That account can't be locked (degraded). Unlock the
account and set up a password for it if necessary. To start an "Administrative Command Prompt" for the
selected administrative user invoke the following command (the password of the administrative user
must be entered when prompted):
Ø runas /user:Admin cmd.exe
To make sure the "Administrative Command Prompt" has been started for the right user invoke this
command:
Ø whoami /user
Its output will be similar to:
User Name SID
========== =========================================
Win7/Admin
S-1-5-21-3686465141-1345607283-3162306831-500
Make sure the SID ends with -500. Otherwise the vSpace Server installation might fail.
Once the "Administrative Command Prompt" console pops up, launch the installer using the following
command:
Ø msiexec /i install-filename.msi
Page 13 of 76
NComputing L300 and L350 User Manual
Status
OK
Degraded
OK
OK
OK
498943_v2