L350 Device Setup
The L350 must be connected to the host PC via an Ethernet switch, router, or other network connection.
Unlike L300 there are no dedicated keyboard or mouse ports on L350. Keyboard and mouse can be
connected to any USB 2.0 ports.
Network connection
The L300 and L350 devices can be configured to use DHCP-assigned network settings, or use static IP
settings specified by the user. To use DHCP-assigned settings, power on the device, then go into the
Device Setup, click the "Network" tab, and select the bullet labeled "DHCP."
Page 28 of 76
NComputing L300 and L350 User Manual
498943_v2
Need help?
Do you have a question about the L300 and is the answer not in the manual?