Installation With Monitor Mount - NComputing L300 User Manual

NComputing L300 and L350 User Manual
If static addressing configurations are used on the network, select "Static configuration" and supply the
appropriate IP, Subnet Mask, Gateway, and DNS server (primary and alternate) information. Click "OK"
to save changes and return to the main screen.
When your L300 or L350 device is connected to the network the "LNK" light (indicating Ethernet link) on
the front panel should be on and you should see that the Ethernet activity light, "ACT," also blinks when
there is active Ethernet traffic to/from the device.
Installation with monitor mount
The L300 and L350 devices come with a mounting plate and two mounting screws, which can be secured
to a monitor via 75mm or 100mm VESA™-compliant mounting holes. The device then attaches to the
mounting plate, resulting in a zero-footprint workstation. In general, we recommend using the top two
mounting holes on the monitor to give maximum cable access space.
Note: The L300 and L350 products also come with a Kensington™ security lock interface, for additional
theft protection.
Page 29 of 76
498943_v2