Two Window Display Combination List (Pt-Fw430E Only) - Panasonic PT-FW430E Operating Instructions Manual

Technical Information

Two window display combination list (PT-FW430E Only)

Subwindow
Main window
RGB input
RGB1
YP P input
B R
RGB input
RGB2
YP P input
B R
VIDEO input
S-VIDEO input
Moving image
system * 1
DVI-D
RGB
system *
2
Moving image
system * 1
HDMI
RGB
system * 2
NETWORK
: SIDE BY SIDE combination is possible
: SIDE BY SIDE combination is impossible
: SIDE BY SIDE combination is possible on the following conditions.
(An image may be unstable in the sub-window under some conditions.)
1) The SIDE BY SIDE signals have the same vertical scanning frequency.
2) SIDE BY SIDE combination has signals other than the combination of Interlace signals by Interlace
signals.
*1 : Only 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i,
1125(1080)/24p, 1125(1080)/50p, 1125(1080)/60p.
*2 : VGA (640 × 480) - WUXGA (1 920 × 1 200)
non-interlace signal, Dot clock frequency : 25 MHz - 162 MHz
(The WUXGA signals support only VESA CVT-RB (Reduced Blanking) signals.)
Note
If the horizontal resolution of the input signal of the sub window is 1 280 pixels or above, the picture quality of the sub
z
window may be lowered.
Some input signals may not display when 1125 (1080)/60p or WUXGA input signals are selected.
z
80
- ENGLISH
RGB1 RGB2
RGB YP P RGB YP
B R
input input input input
S-
VIDEO
VIDEO
Moving
P
input
B R
input
image
system
DVI-D HDMI
*1 *2 *1
RGB Moving RGB
system image system
system
*2
NETWORK