Audio Setting - Panasonic PT-FW430E Operating Instructions Manual

AUDIO SETTING

Set details of Audio functions.
1 ) Press ▲▼ to select [AUDIO SETTING].
2 ) Press the <ENTER> button.
[AUDIO SETTING] screen will be displayed.
z
3 ) Use ▲▼ to select an item and use ◄►
to adjust the level or switch settings.
VOLUME
J
You can adjust the volume of the projector's speaker
or audio output.
Operation Adjustment
Press ► Increases volume
Press ◄ Decreases volume
BALANCE
J
You can adjust the balance of left/right audio output.
Operation Adjustment
Increases the volume
Press ►
from the right
Increase the volume
Press ◄
from the left
IN STANDBY MODE
J
You can set the sound output in standby mode.
Each press of the button switches the settings as
z
shown below.
OFF
OFF Disables sound output during standby
ON Enables sound output during standby
Note
You cannot enable sound output during standy if
z
[STANDBY MODE] of [ECO MANAGEMENT] is set
[ECO].
POWER BUTTON BEEP
J
You can turn on and off the beep sound produced by
the POWER button.
Each press of the button switches the settings as
z
shown below.
OFF
ON
AUDIO IN SELECT
J
A sound input terminal of [AUDIO IN 1], [AUDIO IN
Adjustment
2], [AUDIO IN 3], [HDMI AUDIO IN] and [NETWORK
range
AUDIO IN] can be selected.
The setting will change as follows each time the
z
Max. 63
button is pressed.
Min. 0
AUDIO IN 1
NETWORK
AUDIO IN *
Adjustment
*1 : An input terminal having the network port only
range
*2 : An input terminal having the HDMI port only
L 16 to R 16
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
ON
HDMI
AUDIO IN
NETWORK
AUDIO IN
PROJECTOR SETUP menu
OFF
The POWER button does not beep when
pressed
The POWER button beeps when pressed
AUDIO IN 2
1
Sound is output from AUDIO IN 1
terminal when video of preset input
terminal is projected.
Sound is output from AUDIO IN 2
terminal when video of preset input
terminal is projected.
Sound is output from AUDIO IN 3
terminal when video of preset input
terminal is projected.
Sound is output from HDMI terminal
when video of preset input terminal is
projected.
Sound is output from NETWORK
terminal when video of preset input
terminal is projected.
ON
AUDIO IN 3
HDMI AUDIO
IN *
2
59
ENGLISH -