PROJECTOR SETUP menu
DATE AND TIME
This lets you set the time zone and the current date
and time for the projector's internal clock.
Setting the TIME ZONE
J
1 )
Press ▲▼ to select [DATE AND TIME].
2 )
Press the <ENTER> button.
The [DATE AND TIME] screen will be displayed.
z
3 )
Press ▲▼ to select [TIME ZONE].
4 )
Press ◄► to switch [TIME ZONE].
Adjusting the date and time
J
manually
1 )
Press ▲▼ to select [DATE AND TIME].
2 )
Press the <ENTER> button.
The [DATE AND TIME] screen will be displayed.
z
3 )
Press ▲▼ to select [ADJUST CLOCK].
4 )
Press the <ENTER> button.
The [ADJUST CLOCK] screen will be displayed.
z
5 )
Press ▲▼ to select the item to be set,
and press ◄► to set the local time.
NTP
SYNCHRONIZATION
YEAR
MONTH
DAY
HOUR
MINUTE
SECOND
6 )
Press ▲▼ to select [OK], and press
the <ENTER> button.
This completes setting of the time.
z
60
- ENGLISH
Refer to "Adjusting the date
and time automatically".
(
The right of this page.)
Æ
2011 - 2035
1 - 12
1 - 31
0 - 23
0 - 59
0 - 59
Adjusting the date and time
J
automatically
1 )
Press ▲▼ to select [DATE AND TIME].
2 )
Press the <ENTER> button.
The [DATE AND TIME] screen will be displayed.
z
3 )
Press ▲▼ to select [ADJUST CLOCK].
4 )
Press the <ENTER> button.
The [ADJUST CLOCK] screen will be displayed.
z
5 )
Press ▲▼ to select [NTP
SYNCHRONIZATION] and press ◄► to
switch to [ON].
Each press of the button switches the settings
z
as shown below.
OFF
OFF
Does not synchronize NTP server
ON
Synchronizes NTP server
6 )
Press ▲▼ to select [APPLY], and
Press the <ENTER> button.
This completes setting of the time.
z
Note
To set the date and time automatically, the projector must
z
be connected to the network.
If synchronization with the NTP server fails just after
z
[NTP SYNCHRONIZATION] is turned [ON], or if [NTP
SYNCHRONIZATION] is turned [ON] while the NTP
server is not set, [NTP SYNCHRONIZATION] will return
to [OFF].
Access the projector via a web browser to set the NTP
z
server.
ON