Test Pattern; Initialize All - Panasonic PT-FW430E Operating Instructions Manual

TEST PATTERN

The test patterns do not reflect position, size and
other adjustments. Be sure to display the input signal
before making any test pattern settings.
1 ) Press ▲▼ to select [TEST PATTERN].
2 ) Press the <ENTER> button.
[TEST PATTERN] will be displayed.
z
3 ) Press ◄► to switch test patterns.
You can return to [PROJECTOR SETUP] by
z
pressing the <MENU> or <RETURN> button.
Display sequence of internal test
J
patterns
Each press of the ◄► buttons switches the test
patterns as shown below.
Horizontal lines
Vertical lines
Dots
Cross hatch
Note
The default screen is all white. If you assign this to
z
<FUNC1> to <FUNC3>, Cross hatch becomes the
default.
Use the steps below to return all adjusted "MENU"
items to their factory defaults.
When you perform this function, the projector enters
standby mode to initialize.
1 )
2 )
3 )
4 )
5 )
All white
z
z
Color bars
White cross on
black background
Black cross on
white background
PROJECTOR SETUP menu

INITIALIZE ALL

Press ▲▼ to select [INITIALIZE ALL].
Press the <ENTER> button.
[INITIALIZE ALL] appears.
z
A password must be entered, when
z
[PASSWORD] in the [SECURITY] menu is set
to [ON]. ( Æ page 62)
Press ◄► to select [OK].
Press the <ENTER> button.
The [NOW INITIALIZING...] screen appears,
z
and is followed by [POWER OFF].
Follow the screen instructions to turn
off the power ( page 28).
Æ
All other key operations are unavailable at this
z
time.
The [LANGUAGE] and [INITIAL SETTING]
z
screens appear the next time the projector is
started. ( page 14)
Æ
Note
Projector runtime, lamp runtime and [NETWORK]
settings are not initialized.
After performing [INITIALIZE ALL], the password is
returned to its factory default and [PASSWORD] is
set to [OFF].
61
ENGLISH -