COLOR
You can adjust the color saturation of the projected
image.
1 )
Press ▲▼ to select [COLOR].
2 )
Press ◄► or the <ENTER> button.
The [COLOR] screen will be displayed.
z
3 )
Press ◄► to adjust the level.
Operation
Adjustment
Press ►.
Deepens colors.
Press ◄.
Weakens colors.
TINT
You can adjust the skin tone in the projected image.
1 )
Press ▲▼ to select [TINT].
2 )
Press ◄► or the <ENTER> button.
The [TINT] screen will be displayed.
z
3 )
Press ◄► to adjust the level.
Operation
Adjustment
Adjusts skin tone
Press ►.
toward greenish
color.
Adjusts skin tone
Press ◄.
toward reddish-
purple.
SHARPNESS
This adjusts the sharpness of the pictures.
1 )
Press ▲▼ to select [SHARPNESS].
2 )
Press ◄► or the <ENTER> button.
The [SHARPNESS] screen will be displayed.
z
3 )
Press ◄► to adjust the level.
Operation
Adjustment
Contours become
Press ►.
sharper.
Contours become
Press ◄.
softer.
COLOR TEMPERATURE
Please switch if the white areas of the image are
bluish or reddish.
1 )
Press ▲▼ to select [COLOR
TEMPERATURE].
2 )
Press ◄► or the <ENTER> button.
z
Adjustment
3 )
Press ◄► to switch [COLOR
range
TEMPERATURE].
Maximum
z
value +32
Minimum
value - 32
DEFAULT
HIGH
LOW
Adjustment
range
Maximum
value +32
Minimum
value - 32
Adjustment
range
Depends on
signal input.
PICTURE menu
The [COLOR TEMPERATURE] individual
adjustment screen will be displayed.
The setting will change as follows each time
you press the button.
DEFAULT
Standard setting
Adds a blue tinge to white areas in an
image
Adds a red tinge to white areas in an
image
HIGH
LOW
37
ENGLISH -