Display Setting; Text Change; Menu Lock; Menu Lock Password - Panasonic PT-FW430E Operating Instructions Manual

DISPLAY SETTING

You can display the security message (text and
image) on the projected image.
1 ) Press ▲▼ to select [DISPLAY
SETTING].
2 ) Press ◄► to switch [DISPLAY
SETTING].
The setting will change as follows each time the
z
button is pressed.
OFF TEXT
The [TEXT] / [USER LOGO] display
OFF
is disabled.
TEXT
The text display is enabled.
The logo transferred by "Logo
USER LOGO
Transfer Software *
*1 : "Logo Transfer Software" is included on the
supplied CD-ROM.
Note
To create the image for [USER LOGO], "Logo Transfer
z
Software" included in the supplied CD-ROM is required.
You cannot display both security message and closed
z
caption at the same time.

TEXT CHANGE

You can enter your original text to be displayed when
[DISPLAY SETTING] is turned [TEXT].
1 ) Press ▲▼ to select [TEXT CHANGE].
2 ) Press the <ENTER> button.
The [TEXT CHANGE] screen will be displayed.
z
3 ) Press ▲▼◄► to select characters
and press <ENTER> button to input
them.
Up to 22 characters can be input.
z
4 ) Press ▲▼◄► to select [OK], and
Press the <ENTER> button.
The text is now changed.
z

MENU LOCK

Display the Menu and enable Menu operation by
pressing <MENU> button.
1 )
2 )
USER LOGO
Note
z
z
1 " is projected
z

MENU LOCK PASSWORD

You can change the password for [MENU LOCK]
system.
1 )
2 )
3 )
4 )
Attention
z
z
SECURITY menu
Press ▲▼ to select [MENU LOCK].
Press ◄► to switch [MENU LOCK].
The setting will change as follows each time the
z
button is pressed.
OFF
Deactivates the [MENU LOCK]
OFF
system.
ON Activates the [MENU LOCK] system.
Once [MENU LOCK] is set to [ON], you cannot use
<MENU> button unless you input the correct password.
The [MENU LOCK] is set to [OFF] by default and when
INITIALIZE ALL is executed.
The unlock state is maintained until the projector is set to
the standby mode.
Press ▲▼ to select [MENU LOCK
PASSWORD].
Press the <ENTER> button.
The [MENU LOCK PASSWORD] screen will be
z
displayed.
Press ▲▼◄► to select characters
and press the <ENTER> button to input
them.
Up to 16 characters can be input.
z
Press ▲▼◄► to select [OK], and
Press the <ENTER> button.
To stop, select [CANCEL].
z
The password is "AAAA" by default or when INITIALIZE
ALL is executed.
Change the MENU LOCK PASSWORD regularly and
make it uneasy to guess.
ON
63
ENGLISH -