Advanced Menu; Daylight View; Digital Cinema Reality - Panasonic PT-FW430E Operating Instructions Manual

PICTURE menu

ADVANCED MENU

1 ) Press ▲▼ to select the [ADVANCED
MENU].
2 ) Press the <ENTER> button.
The [ADVANCED MENU] screen appears.
z
3 ) Press ▲▼ to select settings between
[CONTRAST R] and [BRIGHTNESS B].
4 ) Press ▲▼ or the <ENTER> button.
5 ) Use ▲▼ to adjust the level.
Adjustments can be made in the range +32
z
(maximum) to -32 (minimum).
Adjustment
CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS R Press ►.
BRIGHTNESS G Press ►.
BRIGHTNESS B Press ►.
38
- ENGLISH
Operation Result
Press ►. Emphasizes red in
highlight areas
Press ◄. Deemphasizes red
in highlight areas
Press ►. Emphasizes green
in highlight areas
Press ◄. Deemphasizes
green in highlight
areas
Press ►. Emphasizes blue in
highlight areas
Press ◄. Deemphasizes blue
in highlight areas
Emphasizes red in
shadow areas
Press ◄. Deemphasizes red
in shadow areas
Emphasizes green
in shadow areas
Press ◄. Deemphasizes
green in shadow
areas
Emphasizes blue in
shadow areas
Press ◄. Deemphasizes blue
in shadow areas

DAYLIGHT VIEW

This corrects images so that they appear vivid when
projected under bright lighting.
1 ) Press ▲▼ to select [DAYLIGHT VIEW].
2 ) Press ◄► or the <ENTER> button.
The [DAYLIGHT VIEW] individual adjustment
z
screen will be displayed.
3 ) Press ◄► to switch [DAYLIGHT VIEW].
The setting will change as follows each time
z
you press the button.
AUTO
Automatically adjustment to suit ambient
AUTO
brightness
ON Enable DAYLIGHT VIEW
OFF Disable DAYLIGHT VIEW
Note
You can not set [AUTO] if [REAR/DESK] or [REAR
z
CEILING] is selected for [PROJECTION METHOD] of
[PROJECTOR SETUP].
The [AUTO] mode may not function properly if an object
z
is placed on the top of the projector.

DIGITAL CINEMA REALITY

You can improve the vertical resolution of 2-2 and 2-3
pulldown video.
This function is available only with the following signal
inputs.
(525i(480i), 625i(576i), 1125(1080)/60i,
1125(1080)/50i)
1 ) Press ▲▼ to select [DIGITAL CINEMA
REALITY].
2 ) Press ◄► or the <ENTER> button.
The [DIGITAL CINEMA REALITY] screen
z
appears.
3 ) Press ◄► to switch [DIGITAL CINEMA
REALITY] settings.
Each press of the button switches the settings
z
as shown below.
OFF
OFF
Disable DIGITAL CINEMA REALITY
ON
Enable DIGITAL CINEMA REALITY
ON OFF
ON