Narrow (Nar) One-Touch If Filter Selection - Yaesu FTDX5000 Series Operating Manual

NARROW ( NAR ) O
VFO-A "One-Touch Narrow" Operation
 Press the [ A ] button to activate VFO-A (the button will
glow red).
 Pressing the [ NAR ] button engages a narrow IF DSP
filter.
 Pressing the [ NAR ] button once more returns the band-
width control to the Width/Shift system. The factory
default of the bandwidth is as shown below.
A :
DVICE
When the narrow bandwidth is selected, the "
will appear in the display, and the bandwidth depiction in
the SUB DISPLAY- II window will be narrowed (if SUB
II window is showing the bandwidth).
DISPLAY-
[ A ] Button
[ NAR ] Button
MODE
LSB/USB
RTTY ( LSB )
PKT ( LSB/USB )
PKT ( FM )
A :
DVICE
You may select the display pattern shown in the SUB DIS-
PLAY window from three patterns via Menu item "019
DISP SELECT". See page 122 for details.
FT 5000 O
DX PERATING
I
NTERFERENCE
NE
" icon
OFF
2.4 kHz ( 1.5 kHz - 4.0 kHz / 17 steps
2.4 kHz ( 500 Hz - 2.4 kHz / 7 steps
CW
500 Hz ( 500 Hz - 2.4 kHz / 7 steps
500 Hz ( 500 Hz - 2.4 kHz / 7 steps
25 kHz ( ±5.0 kHz Deviation)
AM 9 kHz
25 kHz ( ±5.0 kHz Deviation)
FM
M
ANUAL
R
EJECTION ( S
-T IF F
OUCH ILTER
VFO-B "One-Touch Narrow" Operation
 Press the [ B ] button (the button glows orange).
 Pressing the [ NAR ] button engages a narrow IF DSP
filter.
 Pressing the [ NAR ] button once more returns band-
width control to the Width/Shift system. The factory
default settings of the bandwidth are as shown in the
table below.
A :
DVICE
When the narrow bandwidth is selected, the "
will appear in the display, and the bandwidth on the SUB
III will be reduced, (if the SUB DISPLAY- III
DISPLAY-
window indicates the bandwidth).
[ NAR ] Button
NAR B
UTTON
ON
) 1.5 kHz ( 200 Hz - 1.5 kHz / 8 steps

) 500 Hz ( 50 Hz - 500 Hz / 10 steps

) 300 Hz ( 50 Hz - 500 Hz / 10 steps

) 300 Hz ( 50 Hz - 500 Hz / 10 steps

12.5 kHz ( ±2.5 kHz Deviation)
6 kHz
12.5 kHz ( ±2.5 kHz Deviation)
IGNALS WITHIN
S
ELECTION
[ B ] Button
)

)

)

 )
Page 65
)
3
KHZ
" icon