Table of Contents
Advertisement
Parameters:
basename, channel, terminal, line, position, prompt, shifted, timestamped
Function:
This instructs the terminal attached to client basename on channel to display the prompt at line and posi-
tion and wait for data to be entered from the terminal keypad only. If shifted is set to "true", the terminal
will start in shifted mode. Timestamped appends a (hhmmss) prefix to the returned data.
InputScanner
Parameters:
basename, channel, terminal, line, position, prompt, allowbreakout, timestamped
Function:
This instructs the terminal attached to client basename on channel to display the prompt at line and posi-
tion and wait for data to be entered from the terminal scanner only. Setting allowbreakout to true allow
user to "breakout" of scanner only mode by pressing the end key on the terminal. A termID+CR will be
sent to the host.
InputYesNo
Parameters:
basename, channel, terminal, line, position, prompt
Function:
This instructs the terminal attached to client basename on channel to display the prompt at line and posi-
tion and wait for a Yes (Enter key or C key) or a No (0 key or B key) from the terminal keypad.
Note: C and B keys are used to facilitate keypad entry while scanning with the integrated laser.
InputPassword
Parameters:
basename, channel, terminal, line, position, prompt, shifted
Function:
This instructs the terminal attached to client basename on channel to display the prompt at line and posi-
tion and wait for data to be entered from the terminal keypad only. The entered data is not displayed on
the terminal.
InputSerial
Parameters:
basename, channel, terminal, line, position, prompt
Function:
This instructs the terminal attached to client basename on channel to display the prompt at line and posi-
tion and wait for data to be received through the terminal serial port. Waiting for serial input can be by-
passed by pressing the enter key on the terminal which will send an empty data string to the host (fires the
OnTermData
OutputSerial
Parameters:
basename, channel, terminal, data
This instructs the terminal attached to client basename on channel to send data to the terminal's serial
Function:
port. Data must be
SendDisplay
Parameters:
basename, channel, terminal, line, position, prompt
Function:
This instructs the terminal attached to client basename on channel to display the prompt at line and posi-
tion. Must be followed by an "
ClearScreen
Parameters:
basename, channel, terminal
Function:
This instructs the terminal attached to client basename on channel to clear its display. Must be followed
by an "
Input
ClearLine
Parameters:
basename, channel, terminal, line
Function:
This instructs the terminal attached to client basename on channel to clear the specified line on its dis-
play. Must be followed by an "
SendDate
Parameters:
basename, channel, terminal, line
Function:
This instructs the terminal attached to client basename on channel to display date and time on the speci-
fied line number. Must be followed by an "Input" method call to take effect.
Beep
Parameters:
basename, channel, terminal, count
Function:
This instructs the terminal attached to client basename on channel to beep count times. Count may be a
value from 1 to 9. Must be followed by an "Input" method call to take effect.
PlayVoice
Parameters:
basename, channel, terminal, msgnum
event handler).
less than 231 characters in length for each call to
Input
" method call to take effect.
" method call to take effect.
" method call to take effect.
Input
60
.
OutputSerial
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the 7100 RF Terminal Series and is the answer not in the manual?