Worth Data 7100 RF Terminal Series Owner's Manual page 46

Here is a listing of valid commands and examples:
NOTE: The 15-line terminal defaults to small font on Sign-In.
Command charac- Command function
ters
*@ Reinitializes all terminals
3@ Reinitializes Terminal #3
1@Bn Make Terminal #1 beep n (1-9) times
2@C0 * Clears the entire screen (4, 6 or 15 lines) on Terminal #2. *See
more about 4 and 6 line displays on page 6-4.
0@C1 Clears line 1 on Terminal #0
1@C2 Clears line 2 on Terminal #1
2@C3 Clears line 3 on Terminal #2
0@C4 Clears line 4 on Terminal #0
3@C5 * Clears line 5 on Terminal#3 (if 6 line display), Clears all lines if 4
line display. *See more about the two display types on page 6-4.
1@C6 * Clears line 6 on a 6 line display. Will do nothing on a 4 line dis-
play. *See more about 4 and 6 line displays on page 6-4.
1@C7- Clears lines 7 through 15 on a 15 line display. Will do nothing on
1@CF a 4 or 6 line display. *See more about 4 and 6 line displays on
page 6-4.
1@CX Clears screen (same as @C0) and sets SMALL font, 15 lines
with 26 characters per line
1@CY Clears screen (same as @C0) and sets MEDIUM font, 10 lines
with 20 characters per line
1@CZ Clears screen (same as @C0) and sets LARGE font, 7 lines
with 13 characters per line
1@Dn Displays date and time on line n (1-4) in US (mm/dd/yy,
hh:mm:ss) or Euro (dd/mm/yy, hh:mm:ss) format on Terminal #1
1@Vnn Play voice message #nn (01-99) on Terminal #1
Output dataxxxxxxx to serial port on Terminal #1 -max 231 chars
1@Sdataxxxx
41