Installing The Integrated Hardware Utilities Software - Worth Data 7100 RF Terminal Series Owner's Manual

Installing the Integrated Hardware Utilities Software

The RF Terminal system ships with a CD of programs for use with the RF Terminal and Base station.
You have the choice of installing the following:
Windows Demo Programs and RF DLL Programmers Library

Demo Programs in VB, Access, and Delphi

16 bit and 32 bit DLLs

VB DLL-based QL3 printer demo program
Integrated Hardware Utilities

Voice Manager

Base Configuration

Terminal Configuration

Firmware Loader

Test Program

Cloning
ActiveX Tools

Serial Interface (includes Excel and VB demos)

TCP/IP (includes VB/Access and Delphi demos)
DOS/BASIC source demo programs
Click on the set of programs you wish to install.
To install any of the programs found on the Utilities CD, simply insert the CD into your CDROM drive. The install program should start
automatically. If it does not, simply run the SETUP.EXE program found on the CD.
Running the Test Program...
The test program is provided to help you test your RF Terminal with a two-way communication program. Simply connect the
B51x0 to the host computer and start the program. It will search for the Base and start the demo.
(requires GWBasic or QBasic)
13