Worth Data 7100 RF Terminal Series Owner's Manual page 60

Function: This instructs the
" method call to take effect.
put
ClearScreen
Function: This instructs the
effect.
ClearLine
Parameters: line
Function: This instructs the
9 and A-F Must be followed by an "
DefineFormat (15-line terminal only)
Parameters: font, linecount
Function: Adds a line formatting definition. This command is called multiple times to build a display formatting
definition for multiple lines which is then sent to the
If only one line is defined (that is DefineFormat is called only once), then after SendFormat is called, on-
ly one line will be available for display on the ActiveTerminal.
There are a limited number of lines available depending on the font size(s) chosen. Each font has a de-
fined height:
small: 16
medium: 24
large: 32
The total height of the defined lines cannot exceed 240. If it does, an error code is generated (see
CheckError) and the SendFormat command is ignored.
There is limited display width available for text. Depending on the font you select for a line:
small: 26 characters
medium: 20 characters
large: 13 characters
If you try to send prompt or display text longer than this, it will be truncated and an error code is generat-
ed (see CheckError).
Must be followed by a SendFormat and then an Input call to take effect.
SendFormat (15-line terminal only)
Parameters: FGcolor, BGcolor
Function: Sends to the
fineFormat method. It also sets the user-default display foreground and background colors.
Must be followed by an
SendDate
Parameters: line
Function: This instructs the
lowed by an "
Beep
Parameters: count
Function: This instructs the
lowed by an "
PlayVoice
Parameters: msgnum
Function: This instructs the
1 to 99. Must be followed by an "
ReInit
Function: This instructs the
fect.
Base Stations use the message "Buffer Reinitialized..." to indicate a single terminal re-initialization.
to display the prompt at line and position. Must be followed by an "
ActiveTerminal
to clear its display. Must be followed by an "
ActiveTerminal
ActiveTerminal to clear the specified line on its display. Line number is indicated by 1-
Input
the current Format Definition as created by one or more calls to the De-
ActiveTerminal
Input method call to take effect.
ActiveTerminal to display date and time on the specified line number. Must be fol-
Input " method call to take effect.
to beep count times. Count may be a value from 1 to 9. Must be fol-
ActiveTerminal
" method call to take effect.
Input
to play voice message number msgnum. Msgnum may be a value from
ActiveTerminal
Input " method call to take effect.
to re-initialize. Must be followed by an "
ActiveTerminal
55
" method call to take effect.
ActiveTerminal by the SendFormat command.
In-
" method call to take
Input
" method call to take ef-
Input