Table of Contents
Advertisement
InputKeyBd
Parameters:
line, position, prompt, shifted, timestamped
InputKeyBdColor (15-line terminal only)
Parameters:
line, position, prompt, shifted, timestamped,FG,BG
Function:
This instructs the
tered from the terminal keypad only. If shifted is set to "true", the terminal will start in shifted mode.
Timestamped appends a (hhmmss) prefix to the returned data.
InputExtKeyBd
Parameters:
line, position, prompt
InputExtKeyBdColor (15-line terminal only)
Parameters:
line, position, prompt, FG, BG
Function:
This instructs the ActiveTerminal to display the prompt at line and position and wait for data to be re-
ceived from the PS/2 keyboard attached using an adapter to the terminal serial port. Waiting for external
keyboard input can be bypassed by pressing the enter key on the terminal which will send an empty data
string to the host (fires the OnTermData event handler). External keyboards are supported by terminals
using firmware version RFU1010 or later.
InputScanner
Parameters:
line, position, prompt, allowbreakout, timestamped
InputScannerColor (15-line terminal only)
Parameters:
line, position, prompt, allowbreakout, timestamped,FG,BG
Function:
This instructs the
from the terminal scanner only. Setting allowbreakout to true allow user to "break out" of scanner only
mode by pressing the end key on the terminal. A termID+CR will be sent to the host.
InputYesNo
Parameters:
line, position, prompt
InputYesNoColor (15-line terminal only)
Parameters:
line, position, prompt,FG,BG
Function:
This instructs the
or C key) or a No (0 key or B key) from the terminal keypad.
Note: C and B keys are used to facilitate keypad entry while scanning with the integrated laser.
InputPassword
Parameters:
line, position, prompt, shifted
InputPasswordColor (15-line terminal only)
Parameters:
line, position, prompt, shifted,FG,BG
Function:
This instructs the
tered from the terminal keypad only. The entered data is not displayed on the terminal.
InputSerial
Parameters:
line, position, prompt
InputSerialColor (15-line terminal only)
Parameters:
line, position, prompt,FG,BG
Function:
This instructs the
ceived through the terminal serial port. Waiting for serial input can be bypassed by pressing the enter key
on the terminal which will send an empty data string to the host (fires the
OutputSerial
Parameters:
data
Function:
This instructs the
ters in length for each call to
SendDisplay
Parameters:
line, position, prompt
SendDisplayColor (15-line terminal only)
Parameters:
line, position, prompt,FG,BG
to display the prompt at line and position and wait for data to be en-
ActiveTerminal
to display the prompt at line and position and wait for data to be entered
ActiveTerminal
ActiveTerminal
to display the prompt at line and position and wait for a Yes (Enter key
to display the prompt at line and position and wait for data to be en-
ActiveTerminal
ActiveTerminal
to display the prompt at line and position and wait for data to be re-
to send data to the terminal's serial port. Data must be less than 231 charac-
ActiveTerminal
OutputSerial
.
54
event handler).
OnTermData
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the 7100 RF Terminal Series and is the answer not in the manual?