Table of Contents
Advertisement
Specifications
For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
1
1
2
Figure 4.4
1
1
2
Figure 4.6
RUGGEDCOM RSG2300F
Installation Manual, 04/2021, C79000-G8976-1347-09
Pin
10/100Base-TX
3
TX+
4
Reserved (Do Not Connect)
5
Reserved (Do Not Connect)
6
TX-
7
Reserved (Do Not Connect)
8
Reserved (Do Not Connect)
32)".
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
Name
1000Base-TX
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
1
Tx Connector
1
Rx Connector
2
Figure 4.5
2
1
Tx Connector
1
Rx Connector
2
Figure 4.7
Communication Ports
4.2 Fiber Optic Ethernet Ports
Description
Transmit Data+ or Bi-
Directional Pair B+
Transmit Data+ or Bi-
Directional Pair C+
Receive Data- or Bi-
Directional Pair C-
Transmit Data- or Bi-
Directional Pair B-
Receive Data- or Bi-
Directional Pair D+
Receive Data- or Bi-
Directional Pair D-
"Copper Ethernet
2
LC Port
2
ST Port
25
Advertisement
Table of Contents
