Dräger REGARD 7000 Instructions For Use Manual page 97

Parameter
Channel ID
Channel tag
Channel group
level 1
Channel group
level 2
Channel group
level 3
Channel groups
Channel groups can be used for the logical grouping of functionally and/or
geographically linked plant sections, e.g. all transmitters and output elements of a
production hall. Up to 3 hierarchically classified channel group levels can be
formed. Note in this process that defined channel groups are not permitted to
contain sub-groups and channels simultaneously.
7.11.7.3 Parameter menu Device
Information on the transmitter can be recorded in this menu.
Parameter
Device name
Device part num-
ber
Description
Specify channel number. The channel number is displayed
in the list and column view. Select NOP so that one channel
remains inactive and is not displayed.
Adjustable range: 1 to 1536, NOP
Descriptive text for this channel. The Channel tag is dis-
played in the list view.
Allocate channel to a logical group stage 1 (e.g. production
building 1). All channels of a group can be displayed
together in the list and channel view.
Allocate channel to a logical group stage 2 (e.g. level 1).
Allocate channel to a logical group stage 3 (e.g. room 1).
Description
Input device name of the transmitter connected to the chan-
nel. Selection via dropdown list or text input.
The selection of a device name does not result in the
REGARD 7000 channel configuration being changed for the
corresponding transmitter. The device wizard must be used
to do this.
Order number of the transmitter.
Operation