Dräger REGARD 7000 Instructions For Use Manual page 116

Operation
3. Select channel and confirm.
To change the settings of an alarm:
1. Select an alarm in the list.
 The settings of the alarm are displayed.
2. Make the desired changes and confirm.
To remove an alarm:
1. Enable the checkbox of the alarm.
2. Select
7.11.11.4 Parameter menu Acknowledgement
In this menu channels can be selected via which the current channel can be
acknowledged or reset.
An acknowledgement and a reset of the channels is always possible from the
dashboard.
To add a channel:
1. Select
 A list of the channels is displayed according to the channel filter setting.
2. Select the required channels and confirm.
To remove a channel:
1. Enable the checkbox of the channel. If necessary, enable multiple channels for
removal.
2. Select
7.11.11.5 Inhibit parameter menu
In this menu various channels can be selected via which the current channel can be
inhibited.
A channel can be be inhibited at any time via the Dashboard.
To add a channel:
1. Select
 A list of the channels is displayed according to the channel filter setting.
Parameter/function
Alarm direction
Alarm threshold
to remove the alarm from the list.
.
Possible channel filter settings: Fitting channels, Available channels, All
channels
to remove all selected channels from the list.
.
Possible preventive channel filter settings: Fitting channels, Available
channels, All channels
Description
The alarm direction sets whether the
alarm is for a rising or falling gas con-
centration.
The alarm threshold sets when an
alarm is triggered.
Adjustable range: Equally configured
measuring range