Dräger REGARD 7000 Instructions For Use Manual page 110

Operation
An acknowledgement and a reset of the channels is always possible from the
Dashboard.
To add a channel:
1. Select
 A list of the channels is displayed according to the channel filter setting.
2. Select the required channels and confirm.
To remove a channel:
1. Enable the checkbox of the channel. If necessary, enable multiple channels for
removal.
2. Select
7.11.9.7 Inhibit parameter menu
In this menu various channels can be selected via which the current channel can be
inhibited.
A channel can be be inhibited at any time via the Dashboard.
To add a channel:
1. Select
 A list of the channels is displayed according to the channel filter setting.
2. Select the required channels and confirm.
To remove a channel:
1. Enable the checkbox of the channel. If necessary, enable multiple channels for
removal.
2. Select
.
Possible preventive channel filter settings: Fitting channels, Available
channels, All channels
to remove all selected channels from the list.
.
Possible preventive channel filter settings: Fitting channels, Available
channels, All channels
to remove all selected channels from the list.