Table of Contents
Advertisement
Installation and removal
4.4 Mounting onto standard rail (SCALANCE XF204-2BA IRT)
4.4
Mounting onto standard rail (SCALANCE XF204-2BA IRT)
Installation
Figure 4-2
To install the device on a 35 mm DIN rail complying with DIN EN 60715, follow the steps below:
1. Place the housing guide of the device on the top edge of the DIN rail
2. Press the device down against the DIN rail until the spring catch locks in place
3. Fit the connectors for the power supply, see the section "Connecting up (Page 57)".
4. Insert the terminal blocks into the sockets on the device.
Removal
Figure 4-3
48
DIN rail mounting
Removing from a DIN rail
Operating Instructions, 11/2021, C79000-G8976-C284-15
①
.
②
.
SCALANCE X-200
Advertisement
Table of Contents
