Characteristics:
Transmission speed
Transmission mode
Connectors
Wavelength
Core diameter
•
•
Outer diameter
•
•
Light source
Cable lengths
•
•
Signal attenuation
•
•
Note
No autonegotiation
With optical transmission, the full duplex mode and transmission speed cannot be changed. For
this reason, the autonegotiation function cannot be selected.
GI-PCF
For segment lengths longer than 100 m, you can use GI-PCF cables. Note the information of the
manufacturer.
5.6.3
Push-pull connector for IRT-PRO devices
Push-pull connector technology
With the following devices, the connection to Industrial Ethernet makes use of the PROFINET-
compliant push-pull connector technology:
• X204IRT PRO
• X202-2P IRT PRO
• X201-3P IRT PRO
SCALANCE X-200
Operating Instructions, 11/2021, C79000-G8976-C284-15
with POF
with PCF
with POF
with PCF
minimum
maximum segment length
with POF
with PCF
5.6 Attachment to Industrial Ethernet
100 Mbps
100Base-FX analogous to IEEE 802.3
SC RJ jacks
650 nm
•
980 μm
•
200 μm
•
1000 μm
•
230 μm
LED
•
0 m
•
50 m for POF
100 m for PCF
•
0.230 dB/m
•
0.01 dB/m
Connecting up
77