Anderson 800HS Quick Start Manual

QUICK START GUIDE

800HS

This Quick start up guide does not replace in any way or form the

user manual of this unit. The intension of this document is for use

when setting up the machine after delivery to the dealer and before

the machine is transferred to the end user. This document should

be used as a checklist and memory aid for employees already

familiar with the guidelines in the user manual. Failure to operate

the product correctly can result in damage to the product, personal

property, and cause serious injury. This guide should not be

transferred to the owner of the machine.

Table of Contents

Need help?

Do you have a question about the 800HS and is the answer not in the manual?

Page 1 QUICK START GUIDE 800HS This Quick start up guide does not replace in any way or form the user manual of this unit. The intension of this document is for use when setting up the machine after delivery to the dealer and before the machine is transferred to the end user.
Page 2 QUICK START GUIDE 800HS After receiving your machine you will want to set it up to be ready for any demo opportunity or sale that may come along. Besides that, you want to be sure that the machine is in factory condition, free of damage from transport and defective parts due to the transport from our factory to your dealership.
Page 3 QUICK START GUIDE 800HS When the machine is to be delivered to the user there are steps you must follow to be sure they are comfortable with wrapping their first bale. These steps are also important if you are doing a live demo.
Page 4 QUICK START GUIDE 800HS Honda engine The 800HS is powered by an Honda engine. Before starting the machine make sure it has gas and oil in it. Also when traveling or not using the machine for a long period of time don’t...
Page 5 QUICK START GUIDE 800HS The 680HS is equipped with an hydraulic cut and hold system. The hydraulic cut and hold works with the pressure of the main valve and an accumulator. If the plastic isn’t cut or not completely you want to make sure the blade is sharp and free of rust first.

680hs