Table of Contents
Advertisement
1.2
Connecting Peripheral Device
This section describes how to efficiently hook up peripheral devices with the DVR.
Install the DVR on flat surface. If required, attach a rubber mount for installation.
is recommend to install the system on shelve and use 2.5~3U (1U=1.75 inch or 4.45 cm) space for proper ventilation.
Note
Install the system in location with good ventilation to prevent overheating.
[DVR with Compact Case (W x H x D : 270 x 71 x 215 mm)]
[DVR with 1.5U Height (W x H x D : 360 x 66 x 380 mm)]
※When connecting power cord to the system, it is strongly recommended
Warning !
the system and then
plug the other side of power cord into the wall AC
If a 19-inch rack
is used
with
to first plug the power
socket.
4
1.5U Height case, it
cord to
Advertisement
Table of Contents
