Maintenance
˙When "Filter cleaning" flashes.
˙When Dry is completed
˙After Wash with warm water
When [Clean the filter] flashes, it means the Dry filter medium
has a certain degree of cotton residue attached. It may flash after
just one operation and is not a malfunction.
Remove cotton residue
1
Remove the Dry filter
2
Open the filter
remove the
cotton residual
3
Use a dry towel to wipe it clean
No harsh rubbing (to prevent damaging the filter)
●
●
4
Remove the cotton residual from
(inside of) the Dry filter
5
Remove the Dry filter and wash
6
Install the Dry filter
Insert it completely
●
●
Do not operate the Wash machine when Dry filter
●
●
is removed (to prevent incomplete Dry or kicking up
dusts.)
22
Drying filter
Do not remove when the
●
●
Wash machine is running.
After removing the Dry
●
●
filter, do not wash side of
body with water and place
anything inside
When the mesh is blocked,
●
●
wash thoroughly with warm
water and then dry it well
Remove cotton residue,
●
●
then wipe clean with dry
towel.
Dry filter (inside)
Drain / Dry filter
detergent case
drain filter
1
Remove
remove to take out
the cotton residual
2
Wash
Rinse with running
water, then rub the
edge with fingers
while Wash (do not
scrub with a brush,
etc.)
3
Install
2. press
Install after it is
completely dry.
1. insert
Dry filter
door seal