Table of Contents
Advertisement
5. Installing the mute rodent board
n Installing the mute rodent board
After removing the mute rodent board from the front side of the washing machine, insert it
into the groove at the bottom of the mute base until it is perfectly aligned. (As shown below)
The side of the mute rodent board with arrow icon should face upward. Insert it into the
groove of the mute base with the arrow icon faces backward until it is perfectly aligned.
6. Levelling the appliance
Look at the leveller
Horizontal
Right side
higher
Left side
higher
Rear side
higher
Front side
higher
n How to check rattling
Push the diagonal corners alternately and conf rm
there is no rattling.
If the appliance rattles, select the height of the legs
and check the leveller.
Adjust the tilt.
No adjustment
needed.
Lower the right
side or raise the
left side.
Lower the left side
or raise the right
side.
Raise the front
side.
(2 locations)
Lower the front
side.
(2 locations).
n How to select the tilt
(1) Turn to loosen to loosen.
(2) Raise or lower to select the
tilt.
(1) Turn to tighten to fix.
Water supply
hose fitting
※ 2 adjustable feet are
attached at the front side.
Loosen
To raise
To prevent
abnormal
vibration
level gauge
(1)
(3)
Tighten
(2)
(2)
Knob
To lower
Adjustable feet
43
Advertisement
Table of Contents
