Table of Contents
Advertisement
2. Removing the fixing bolts for transfer and
attach the cover
1
Remove the fixing bolts for
transfer using the included
spanner.
Remove the 3 fixing bolts for transfer that have fixed
inside the appliance. If the appliance is used without
removing the bolts, vibration may increase or the
appliance may move, causing danger.
l The removed fixing bolts for transfer and the included spanner are necessary when transferring, etc. Give
Note
them to the customer.
3. Connect the water hose
1
Connect the water hose to the connection port
connection port
water-drain hose
Water supply
hose fitting
S
n i
k
Drain hose
90 cm
Rise of
drain hose
(max. 110 cm)
Connecting the water hose
securing clip
Max. 1.1 m
Mín. 0.7 m
2
Attach the included cover
with the screw.
Insert the claw of the cover to the hole and fix with
the screw. (3 locations)
claws
screws
CAUTION
Be sure to attach the cover.
(To avoid injury caused by the edge).
l When transporting the main unit, attach the bolts in the
reverse procedure. Remaining water may spill from the inside
the main unit. Carry the appliance with the drain hose
propped up against the main unit.
n Draining to a sink or wash basin
CAUTION
Secure the drain hose with an elbow so that it does not come off
due to water pressure during drainage.
Elbow
(supplied)
n Draining to a stand pipe
Stand pipe
To prevent
abnormal vibration!
cover
screws
41
Advertisement
Table of Contents
