Table of Contents
Advertisement
4. Connect the water supply hose fitting and water supply
hose
1
Press the other end of the water
supply hose connected to the washing
machine straight against the cold
water faucet, and tighten the nut
clockwise with your hand.
2
Likewise, connect the other end of
the water supply hose connected to
the washing machine to the hot water
faucet.
l Turn on the water faucets to check that water leaks from
neither the water supply valves of the washing machine nor
the water faucets.
Water supply
hose fitting
n How to remove the water supply hose
1. Turn off the water faucet.
2. Close the door, turn the power ON, and then press
start to drain the water inside the pipe.
(to prevent the water from scattering)
3. Turn off the power after about 1 minute.
4. Push the fixing rod downward, pull down the lid, then
remove the water supply hose.
n Do not use [Stain Master
as it cannot proceed with cooling and
dehumidifying, and the clothes cannot be dried.
n Turn on the water faucet even when
drying
It requires water for cooling and dehumidifying,
so if the water faucet is turned off it cannot dry
clothes.
42
Note
Must install a brand new water
supply hose fitting Water supply
hose
(use old parts will cause leakages.)
] when drying.
+
Note
For easy path of the water supply hose,
after deciding the position of the elbow
part, lock the nut straighly and firmly until
the end
(Not locking firmly will cause leakage)
When installing the water supply hose,
please keep proper length and do
not over-pull to prevent
leakage
water supply hose screw
water
supply
hose
elbow
nut
Max. 1.1 m
Mín. 0.7 m
Advertisement
Table of Contents
