Table of Contents
Advertisement
Configuring PPP and MLPPP
Table 3-1: PPP/MLPPP Configuration Commands (continued)
Command
config vlan <vlan> add multilink <groupname>
config vlan <vlan> delete multilink
<groupname>
create account pppuser <name> {encrypted}
{<password>}
create multilink <groupname>
delete multilink <groupname>
delete account pppuser <username>
disable multilink <groupname>
enable multilink <groupname>
restart multilink <groupname>
unconfig ppp port <portlist>
Monitoring PPP/MLPPP Links
The following commands monitor the status of the PPP and MLPPP links.
Table 3-2: PPP/MLPPP Show Commands
Command
show multilink <groupname>
show multilink [<groupname>] stats {detail}
show multilink [<groupname>] [t1 | e1] alarms
{detail}
show multilink [<groupname>] t1 errors
[near-end | far-end] [totals | intervals | current]
show multilink [<groupname>] e1 errors
near-end [totals | intervals | current]
3-6
Description
Adds an MLPPP multilink group to a VLAN.
Removes an MLPPP multilink group from a
VLAN.
Adds a username that will be accepted by the
local end during authentication.
Creates a multilink group.
Deletes a multilink group.
Removes a username from the local
authentication list.
Disables a multilink group.
Enables a multilink group (and enables all
ports in the group).
Restarts multilink group. Configuration changes
made to an enable multilink group will not take
effect until the group is restarted.
Resets the port to the default PPP
configuration, no authentication and BCP
encapsulation.
Description
Displays the configuration of the multilink
group.
Displays multlink group statistics.
Displays T1/E1 alarm status for multilink
groups.
1
Displays T1 error statistics for a multilink
group.
2
Displays E1 error statistics for a multilink
group.
WAN Module Installation and User Guide
Advertisement
Table of Contents
