Module Leds - Extreme Networks WM-4T1i WAN Installation And User Manual

Installing the WAN Module
Module reset
Module status T3 port 10/100 Mbps ports
LEDs
38_WM1T3i
Figure 1-2: WM-1T3i Module
The WM-1T3i module has one T3 port, consisting of a two BNC connectors, one for the
transmit path and one for the receive path. The module also has two general purpose
10/100 Ethernet ports. Like the other WAN modules, the WM-1T3i also has eight
internal loopback ports.

Module LEDs

The T1/E1 module LEDs are shown in Figure 1-3. The WM-1T3i module LEDs are
similar, but there is only one WAN port LED and the Ethernet port LEDs are numbered
2 and 3.
Figure 1-3: T1/E1 Module LEDs
1-4 WAN Module Installation and User Guide