Table of Contents
Advertisement
Released humidity can cause burns:
• Do not open the appliance door
when using the function: True Fan
Cooking PLUS.
• Open the appliance door with care
after using the function: True Fan
Cooking PLUS.
Refer to "Hints and tips"
chapter.
1. Open the oven door.
2. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
3. Turn the knob for the function: True
Fan Cooking PLUS
4. Turn the knob for the temperature to
select a temperature.
5. Put food in the appliance and close
the oven door.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
6. To deactivate the appliance, turn the
knobs for the oven functions and
temperature to the off position.
7. Remove water from the cavity
embossment.
WARNING!
Make sure that the
appliance is cool before
you remove the
remaining water from
the cavity embossment.
8.4 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continues
to operate until the oven cools down.
8.5 Inserting the oven
accessories
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
.
8.6 Telescopic runners -
inserting the oven accessories
With telescopic runners you can put in
and remove the shelves more easily.
• All accessories have small
indentations at the top of
the right and left side to
increase safety. The
indentations are also anti-
tip devices.
• The high rim around the
shelf is a device which
prevents cookware from
slipping.
Keep the installation
instructions for the
telescopic runners for future
use.
ENGLISH
13
Advertisement
Table of Contents
