Programming Remote Control
A programming remote control is required to perform all TV setup adjustments including
programming channels. The remote is NOT included with the TV and must be ordered
separately – one remote is capable of programming an entire hospital of televisions. Please
order programming remote control part number PD108-420.
Remote Control
Before you use the remote controller, please install the batteries.
1 POWER
Turns the TV on or off.
2 MUTE
Turns the sound on or off.
3 NUMBER buttons
Selects channel numbers.
4 Dash
Press to select DTV (Digital TV) channels.
For example, to select channel '54-3', press '54', then press '-'
and '3'.
5 SETUP
Displays the main menu.
Exit current OSD menu.
6 TV/AV
Selects programmed external inputs.
7 OK
Accepts your channel selection. Displays digital channel
information.
8 CH ▲▼ (Channel Up / Down)
Selects next channel or a menu item.
11
Document Number: PD196-104 Rev 1
Need help?
Do you have a question about the PDI-P15LCDC-ARM and is the answer not in the manual?