Extreme Networks BlackDiamond 6800 Installation And User Manual page 99

Table A-4: Summary of Commands Not Supported for ATM Ports (continued)
Command
enable isq <name>
enable mac-vlan mac-group [any |
group_number] ports <portlist>
enable mirroring to <port>
enable sharing <port> grouping <portlist>
enable smartredundancy <portlist>
restart ports <portlist>
show ports {<portlist>} collisions
1. When <name> is a protocol-based VLAN.
2. When an ATM port is a member of the VLAN specified as <name>.
Asynchronous Transfer Mode (ATM) Module Installation and User Guide
Commands and Functions Not Supported
Description
Not supported when an ATM port is a member of
the VLAN specified as <name>.
ATM I/O module ports do not support
Protocol-Based VLANs or MAC Address VLANs.
Port mirroring is not supported on ATM module
ports.
Load-sharing port groups are not supported for
ATM module ports.
This command is an Ethernet-specific command.
Restarting ports is not supported on ATM module
ports.
This command is an Ethernet-specific command.
A-7