Generic Vlan Registration Protocol Functions; Configuring Forwarding Database Attributes; Configuring Spanning Tree Attributes - Extreme Networks BlackDiamond 6800 Installation And User Manual

Configuring the ATM Module
, which is an integer in the range from 0 to 7. To preserve the 802.1p priority,
priority
do not enter the
priority
Default behavior is that tag nesting is disabled (off) for all VLAN IDs.
Tag push operations apply to egress frames only when the port is configured to
transmit tagged frames for the associated VLAN. Tag nesting operations apply only to
ingress frames that contain a VLAN tag. Tag nesting operations are applied after
classification to a QoS profile.
The DiffServ and RED functions are not performed by ATM ports when frames
contain nested tags (more than one tag).

Generic VLAN Registration Protocol Functions

The Generic VLAN Registration Protocol (GVRP) is not supported on ATM module
ports, so the following command will not work if you specify an ATM port:
config gvrp {listen | send | both | none] ports <portlist>

Configuring Forwarding Database Attributes

ATM ports support all of the existing ExtremeWare forwarding database (FDB)
commands. For more information on these commands, see the ExtremeWare Software
User Guide.

Configuring Spanning Tree Attributes

ATM ports support all of the existing ExtremeWare Spanning Tree commands.
3-28
keyword and value when using this command.
Asynchronous Transfer Mode (ATM) Module Installation and User Guide