Extreme Networks BlackDiamond 6800 Installation And User Manual page 89

Table 3-14: Changes to Port Commands
Command
disable ports <portlist>
enable ports <portlist>
show ports {<portlist>} info {detail}
show ports {<portlist>} qosmonitor {egress |
ingress} {discards}
show ports {<portlist>} rxerrors
show ports {<portlist>} txerrors
Jumbo Frame Support
The jumbo frame size affects the size of the payload that can be transmitted or received
on an ATM port.
If jumbo frame support is enabled on an ATM port, the following can occur:
Asynchronous Transfer Mode (ATM) Module Installation and User Guide
Additional ATM Module Support Topics
Description of Change
Augmented implementation: For ATM modules,
this command brings down the ATM link on the
specified port, and changes the port status LED
to blinking green.
Augmented implementation: For ATM modules,
this command enables the ATM link on the
specified port, and changes the port status LED
to solid green (if no other problems exist).
Augmented implementation: The information
displayed by this command includes DiffServ and
RED configuration parameters for the ATM
module ports.
Enhanced command: The optional egress,
ingress, and discards keywords display
information for ATM ports.
By default, the command displays transmissions
in the egress direction. The ingress keyword
causes the command to monitor and display
queue statistics for the ingress direction. The
discard keyword causes the command to monitor
and display packet discard statistics rather than
transmission statistics.
Augmented implementation: Only a subset of
the statistics displayed by this command are
applicable to ATM ports. The fields that do not
apply to ATM ports are displayed with values of
all zeroes.
Augmented implementation: Only a subset of
the statistics displayed by this command are
applicable to ATM ports. The fields that do not
apply to ATM ports are displayed with values of
all zeroes.
3-47