Configuring the ATM Module
Displaying RED Configuration Information for ATM Module Ports
While the syntax of the existing
the output of the command now displays the RED and DiffServ configuration
parameters associated with ATM module ports.
To display QoS, RED, and DiffServ information for a specified ATM port, use the
following command:
show ports info detail
For ATM ports, the existing
enhanced to display the number of packet transmissions and discards from each
queue (in both egress and ingress directions).
QoS Monitor
The QoS Monitor utility is supported for ATM module ports. The QoS Monitor and its
associated ExtremeWare commands are described in the ExtremeWare Software User
Guide.
Intra-Subnet QoS
Intra-Subnet QoS (ISQ) is not supported on switches that use the "i" chipset; the ATM
module is supported only on switches that use the "i" chipset.
3-44
show ports info detail
show ports qosmonitor
Asynchronous Transfer Mode (ATM) Module Installation and User Guide
command has not changed,
command has also been