GEM Q50 eSyStep Operating Instructions Manual page 91

11.4.29 Operating times
The current valve travel times can be read out with the Operating times parameter.
Index Sub- Off- Access
In- set Rights
dex
0x62 1 0 RO
2 8 RO
Description of parameter values
Index name
Operating times
11.4.30 Drive sets
The force of the actuator can be influenced with the Drive sets parameter when the valve is initialized and during initialization.
Index Sub- Off- Access
In- set Rights
dex
0x90 2 8 R/W
3 16 R/W
Description of parameter values
Index name
Drive sets
Force settings
Actuator size
AG0 and AG1
www.gemu-group.com
Length Index name
8 bits Operating times
8 bits
Parameter
Open
0 to 25.5 s
Close
0 to 25.5 s
Length Index name
3 bits Drive sets
3 bits
Parameter
Force
Force initialization
Parameter
Open
Close
Values
0 to 255 Read out operating time (in tenths of seconds) from end pos-
ition CLOSED to end position OPEN.
0 to 255 Read out operating time (in tenths of seconds) from end pos-
ition OPEN to end position CLOSED.
Parameter
Force
Force initialization
Values
1 ... 6 Set the force of the valve. Preset at the factory depending on
the valve type.
1 ... 6 Set the force during initialization. Preset at the factory de-
pending on the valve type.
Setting parameter
1
6
91 / 108
11 Specific data IO-Link (pin 6)
Type Default
uint:8 0
uint:8 0
Description
Type Default
uint:16 -
uint:16 -
Description
Force
Minimum force
Maximum force
Values
0 to 255,
0 to 25.5 s
0 to 255,
0 to 25.5 s
Values
1 ... 6
1 ... 6
GEMÜ Q50 eSyStep