GEM Q50 eSyStep Operating Instructions Manual page 69

Pin
4 I-/U-, actual value output
5 n.c.
10.3 Overview of available functions – Input and output signals
▶ The factory default setting "Configured for emergency power supply module" is reset to default settings when a reset is car-
ried out.
Digital input 1
Digital input 2
Digital input/output
Digital output
Analogue input
Analogue output
www.gemu-group.com
Signal name
Function
Off/Open/Closed/Safe/On/Ini-
tialization
Off/Open/Closed/Safe/On/Ini-
tialization
Open/Closed/Error/Error and
warning/Initialization
Open/Closed/Error/Error and
warning
4–20 mA/0–20 mA/0–10 V
4–20 mA/0–20 mA/0–10 V
NOTICE
Control module S0
Default settings
Initialization
Off
Error
Closed
4–20 mA
4–20 mA
69 / 108
10 Electrical connection
Control module S5, S6
Factory default setting "Con-
figured for emergency power
supply module"
Initialization
Safe/On
Error
Closed
4–20 mA
4–20 mA
GEMÜ Q50 eSyStep