Turning On - Renogy LYCAN 5000 Power Box Quick Manual

Turning On

z Please turn LYCAN on before charging it or using it to power appliances.
Open the Front Door Locks with the
included Keys and rotate the wing
knobs counterclockwise by 90° to
open the front door.
Open the Back Door Locks with the
included Keys and rotate the wing
knobs counterclockwise by 90° to
open the back door.
LYCAN may not be operating properly and needs troubleshooting if the following occurs after turning LYCAN
on. Please refer to the full user manuals of relevant products on renogy.com for troubleshooting instructions.
z 48V 50Ah Smart Lithium Iron Phosphate Battery: The indicator of the battery lights up red, flashes
red, or does not light up.
z BT-2 Bluetooth Module: The POWER indicator of the Bluetooth module does not light up.
z 48V 3500W Solar Inverter Charger: The Solar Inverter Charger Display does not turn on, or the
Solar Inverter Charger FAULT Indicator lights up red or flashes red.
z Please close the front door and back door, rotate the wing knobs clockwise by 90°, and lock the
Front Door Lock and Back Door Lock after turning LYCAN on.
STEP-2.1
Push the switch up to close the
Battery Circuit Breaker.
1s
STEP-2.4
Press and hold the power button on
the top of either of the batteries for
1 second to turn on the batteries.
STEP-2.2
ON INFORMATION
please ensure that your changer is lithium lron phosphate compatible before use. For more information, please visit www.renogy.com c 87.7111
OT
le, crush,puncture, or incinerate the battery.
it the external contacts.
122 (50 C)
battery to temperatures above F
ON INFORMATION
please ensure that your changer is lithium lron phosphate compatible before use. For more information, please visit www.renogy.com c 87.7111
OT
le, crush,puncture, or incinerate the battery.
it the external contacts.
battery to temperatures above 122 F (50 C)
STEP-2.5
Rock the switch on the bottom of
the solar inverter charger to the
ON position (I) to turn on the solar
inverter charger.
The indicators of the batteries flash
green. The POWER indicator of
the Bluetooth module lights up. The
buzzer of the solar inverter charger
beeps briefly, and the Solar Inverter
Charger Display turns on.
STEP-2.3
STEP-2.6
07