General Wireless Lan Screen - ZyXEL Communications PLA4231 User Manual

Chapter 10 Wireless LAN
Encryption
Wireless networks can use encryption to protect the information that is sent in the wireless
network. Encryption is like a secret code. If you do not know the secret code, you cannot
understand the message.
Table 17 Types of Encryption
Weakest
Strongest
Usually, you should set up the strongest encryption that every wireless client in the wireless
network supports. For example, suppose the AP does not have a local user database, and you do
not have a RADIUS server. Therefore, there is no user authentication. Suppose the wireless network
has two wireless clients. Device A only supports WEP, and device B supports WEP and WPA.
Therefore, you should set up Static WEP in the wireless network.
Note: It is recommended that wireless networks use WPA-PSK or stronger encryption.
WEP encryption are better than none at all, but it is still possible for unauthorized
devices to figure out the original information pretty quickly.
When you select WPA2-PSK in your PLA4231, you can also select an option (WPA-PSK
Compatible) to support WPA as well. In this case, if some wireless clients support WPA and some
support WPA2, you should set up WPA2-PSK and select the WPA-PSK Compatible option in the
PLA4231.
Many types of encryption use a key to protect the information in the wireless network. The longer
the key, the stronger the encryption. Every wireless client in the wireless network must have the
same key.
10.3.1.3 WPS
WiFi Protected Setup (WPS) is an industry standard specification, defined by the WiFi Alliance. WPS
allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Depending on the devices in your network, you can either press a
button (on the device itself, or in its configuration utility) or enter a PIN (Personal Identification
Number) in the devices. Then, they connect and set up a secure network by themselves.

10.4 General Wireless LAN Screen

Use this screen to enable or disable the WLAN, enter the SSID, select the channel and configure
wireless security settings.
Note: If you are configuring the PLA4231 from a computer connected to the wireless LAN
and you change the PLA4231's SSID, channel or security settings, you will lose
your wireless connection when you press Apply to confirm. You must then change
the wireless settings of your computer to match the PLA4231's new settings.
Click Network > Wireless LAN to open the General screen.
70
No Security
Static WEP
WPA-PSK
WPA2-PSK
PLA4231 User's Guide