Dell EMC VxFlex Ready Node User Manual page 174

Security Management
Setting the User Authentication Method
Dell EMC VxFlex Ready Node AMS User Guide
174
Syntax
scli --logout
Actual command syntax is operating-system dependent. For more information, see
"CLI basics".
Description/Notes
This command logs the current user out of the system.
Example
scli --logout
Command
set_user_authentication_method
Syntax
scli --set_user_authentication_method (--ldap_authentication | --
native_authentication | --native_and_ldap_authentication) [--
i_am_sure]
Actual command syntax is operating-system dependent. For more information, see
"CLI basics".
Description/Notes
This command sets user authentication method for the system.
Note:
Use this command with caution, because it is complex to roll-back this operation.
Parameters
Parameter
--ldap_authentication
--native_authentication
--native_and_ldap_authentication
Description
LDAP based authentication method, where
users are managed in LDAP compliant server.
In order to switch to this authentication
method, LDAP service parameters should be
configured.
Native authentication method, where users
are managed locally in the system
A hybrid authentication method. Both LDAP
and Native users may log into the system
after it is set.