Dell EMC VxFlex Ready Node User Manual page 172

Security Management
Logging in
Dell EMC VxFlex Ready Node AMS User Guide
172
When using the LDAP, the command should also include the LDAP domain it is using,
for example:
scli --mdm_ip 10.10.10.3,10.10.10.4 --login --username
JohnDoe@ldap.acme.com
The default user created during setup is the Super User, with the
Note: For detailed information on issuing CLI commands, see the CLI Reference
Guide .
Command
login
Syntax
scli --login --username <NAME> [--password <PASSWORD>] [(--
ldap_authentication | --native_authentication)] [--
approve_certificate]
Actual command syntax is operating-system dependent. For more information, see
"CLI basics".
Description/Notes
This command logs the specified user into the management system. Every user must
log in before performing CLI commands.
When a user is authenticated by the system, all commands performed will be done
with their respective role until a logout is performed, or until the session expires, by
reaching one of the following timeouts:
Maximum session length (default: 8 hours)
l
Session idle time (default: 10 minutes)
l
To log in to the AMS, from a local Linux AMS server, run:
/opt/emc/scaleio/ams/webapps/ROOT/resources/scli --login --
username admin --password <AMS_admin_password>
Example
/opt/emc/scaleio/ams/webapps/ROOT/resources/scli --login --
username admin --password Scaleio123
Output, similar to the following, is displayed:
Logged in. User role is Administrator. System ID is
0000000000000000
admin username.