Dell EMC VxFlex Ready Node User Manual page 173

Logging out
To log in to the AMS, via SSH to the AMS server, run:
/opt/emc/scaleio/ams/webapps/ROOT/resources/scli --login --
username admin --password <AMS_admin_Password> --mdm_ip <AMS_IP>
Example
/opt/emc/scaleio/ams/webapps/ROOT/resources/scli --login --
username admin --password Scaleio123 --mdm_ip 10.136.247.106
Output, similar to the following, is displayed:
Logged in. User role is Administrator. System ID is
0000000000000000
Parameters
Parameter
--username
--password
--ldap_authentication
--native_authentication
--approve_certificate
Example
scli --login --username siouser1 --password 1!2@3A
Command
logout
Description
User name
User password. If you do not type your
password, you will be prompted to do so.
Note:
In Linux, to prevent the password from being
recorded in the history log, leave out the --
password flag and enter the password
interactively.
Login with LDAP authentication method. LDAP
authentication parameters should be configured
and LDAP authentication method should be set.
Login with the native authentication method
(default)
Preemptive approval of the MDM certificate
Dell EMC VxFlex Ready Node AMS User Guide
Security Management
173