SPECIFICATION Please note that details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com...
1. Check the jack for damage before use and do not use if damaged. If in doubt, DO NOT use. Consult your local dealer. 2. ALWAYS use spare parts supplied by Clarke International. Using non- standard parts could be extremely dangerous.
OPERATION Before use, visually inspect the jack for oil leaks or any other sign of damage. Should any be apparent, have the jack inspected and repaired by a qualified technician before use. WARNING! NEVER WORK ON THE VEHICLE WHEN SUPPORTED ONLY BY A JACK.
A large cross headed screwdriver is required. • The oil should be almost level with the bottom of the oil filler hole. • Oil can be topped up using Clarke Hydraulic Oil (p/no 3050830 for 1 litre). OIL REPLACEMENT 1.
COMPONENT PARTS t s i t f i Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com...
Page 9
COMPONENT PARTS t s i n i l t f i n i l l l i t i l " 6 - - - Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com...
Page 10
COMPONENT PARTS Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CTJ2000LP and is the answer not in the manual?
Questions and answers